Worth Data 5202D Scanner Instrukcja Instalacji Pobierz pdf (Strona 13)

4. Installation

This chapter explains the installation procedure of the PcCR 1417.

The FSE who installs the PcCR 1417 shall follow the steps described herein. Upon

completion of the installation, fill out the Installation Report (Appendix B).

4.1 General

On-site installation of the PcCR 1417 shall be carried out by FSEs authorized by Orex,

and will follow the instructions below:

1. Unpack the PcCR 1417 and position it in the desired location.

2. Verify the integrity of the unit and its components.

3. Plug the system into the electrical outlet, and connect the USB cable to

the PC (section 4.4.1.)

4. Plug in the WIBU-KEY (green dongle) supplied with the Onyx-Rad CD

to the parallel port on the back of the computer, the green dongle must

be the first one connected to the parallel port and then you can connect

other dongles to him!!!

5. Plug in the GOP dongle to the parallel port on the back of the computer

on the Onyx-rad dongle.

6. Install the software for the PcCR 1417 (section 4.4.2 – 4.4.4.)

7. Test the system’s functional operation.

8. Send a completed Installation Report (Appendix B) to Orex service

department.

Note: The warranty shall not be issued until Orex service department receives the

installation report. (Warranty will be issued only after the Orex service department

receives the installation report)

Installation 4-1

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 57 58

Brak uwag

Worth Data 5202D Scanner Instrukcja Instalacji Strona 13